
Temperature Rating: -40 degree to 70 degree
Voltage Rating: 600/1000V
This 0.6/1kV plastic insulated fire-resistant power cable is our qualified product, and it can offer fire proofing performance.
the conductor uses fire-proof tape which can relieve or stop the fire caused by the heat generated during the long time working.

Standards for Mica Tape Fire Resistant Xlpe Insulated Cable in 0.6/1KV LV
The 0.6KV/1KV PVC insulated (fire-resistant) power cable meets the national standard of GB/T 12706-2008 which is equal to IEC 60502-2004.
The fire resistant property conforms to the GB/T 18380-2008 which means that it also satisfies IEC 60332-2004.
|
|
||
|
Nominal cross-sectional area of conductor mm² |
||
|
0.6/1(1.2)kV
|
1.8/3(3.6)kV
|
|
|
1.5,2.5
|
0.7
|
-
|
|
4,6
|
0.7
|
-
|
|
10,16
|
0.7
|
2.0
|
|
25,35
|
0.9
|
2.0
|
|
50
|
1.0
|
2.0
|
|
70,95
|
1.1
|
2.0
|
|
120
|
1.2
|
2.0
|
|
150
|
1.4
|
2.0
|
|
185
|
1.6
|
2.0
|
|
240
|
1.7
|
2.0
|
|
300
|
1.8
|
2.0
|
|
400
|
2.0
|
2.0
|
|
500
|
2.2
|
2.2
|
|
630
|
2.4
|
2.4
|
|
800
|
2.6
|
2.6
|
|
1000
|
2.8
|
2.8
|
1. The minimum bending radius when laying the cable is not less than 10 times the outer diameter of the cable.
2.
3. The yjv22 / yjlv22 cables are laid underground and can withstand external mechanical forces, but cannot withstand large tensile forces.
4. Special tools should be used for cable laying, such as pay-off racks, guide rollers, etc., to prevent mechanical damage during the laying process and keep away from heat sources.
5. When laying the cable through the pipe, the inner diameter of the pipe should not be less than 1.5 times the outer diameter of the click.
It is for bidden to squeeze the cable when passing through the pipe. The total area of the cable should not exceed 40 percent of the total area of the pipe.
for Fire Resistant Xlpe Insulated Cable in 0.6/1KV LV
1. Rated voltage U0/U: 0.6/1kV
2. Permitted long-term working temperature: 70 degree
3. Short circuit: Conductor temperature Less than or equal to 160 degree , lasting time Less than or equal to 5 seconds
4. The ambient temperature should above 0 degree when laying, and preheating is necessary if the temperature is below 0 degree . The laying process is not affected by the drop height.
5. Minimum bending radius during laying: 20 times of outer cable diameter for single core type, and 15 times for multi-core type.
6. The neutrality of five-core power cable is distinct from the earth wire, and the system is very stable.

תגיות פופולריות:




